Kia Optima: Radiator Components and Components Location - Cooling System - Engine Mechanical SystemKia Optima: Radiator Components and Components Location

Components


1. Cooling fan assembly
2. Radiator assembly
3. Mounting insulator
4. Radiator mounting bracket
5. Radiator upper hose
6. Radiator lower hose
7. Reservoir tank
8. Over flow hose

Coolant Repair procedures
Refilling And Bleeding     Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from the rad ...

Radiator Repair procedures
Inspection Radiator Cap Testing 1. Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester. 2. Apply a pressure of 93.16 ~ 122.58kPa (0.95 ~ 1.25kg ...

See also:

Air Bag System Components
The main components of your SRS are: An air bag in the steering wheel. A second air bag in the passenger’s side dashboard. A diagnostic system that continually monitors system operation. An ...

Air bag warning light
The purpose of the air bag warning light in your instrument panel is to alert you of a potential problem with your air bag - Supplemental Restraint System (SRS). When the ignition switch is turn ...

Yaw-rate and Lateral G Sensor Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the floor console. (Refer to the Body group - "Console") 3. Disconnect the yaw rate & lat ...

Copyright © www.kiopman.com 2020