Kia Optima: Pressure Source Unit Components and Components Location - AHB(Active Hydraulic Boost) System - Brake SystemKia Optima: Pressure Source Unit Components and Components Location

Components


   
   
PSU must not be disassembled.
1. Motor connecter
2. Bracket
3. Block
4. Accumulator
5. Damper
6. Motor





Brake Actuation Unit Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the air duct (A). 3. Remove air cleaner assembly (B). 4. Disconnect the brake fluid l ...

Pressure Source Unit Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the air duct (A). 3. Remove air cleaner assembly (B). 4. Disconnect the brake fluid lev ...

See also:

Valve Clearance Adjustment
Valve Clearance Inspection And Adjustment     Inspect and adjust the valve clearance when the engine is cold (Engine coolant temperature : 20°C (68°F)) and cylinder hea ...

Tightening Torques
Engine Control System Item kgf.m N.m lb-ft ECM installation bolt 1.0 ~ 1.2 9.8 ~ 11.8 7.2 ~ 8.7 ...

Emission Control System
The emissions control system of your vehicle is covered by a written limited warranty. Please see the warranty information contained in the Warranty Information Booklet in your vehicle. ...

Copyright www.kiopman.com 2021