Kia Optima: Positive Crankcase Ventilation (PCV) Valve Repair procedures - Crankcase Emission Control System - Emission Control SystemKia Optima: Positive Crankcase Ventilation (PCV) Valve Repair procedures

Removal
1.
Disconnect the vapor hose (A).
2.
Remove the PCV valve (B).

Inspection


Inspection
1.
Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger movement.


   
   
If the plunger does not move (PCV valve is clogged), clean or replace the valve.
Installation
1.
Install in the reverse order of removal.

PCV Valve installation:
1.9 ~ 2.8 N.m (0.19 ~ 0.29 kgf.m, 1.4 ~ 2.1 lb-ft)

Positive Crankcase Ventilation (PCV) Valve Description and Operation
Operation Principle ...

Evaporative Emission Control System
...

See also:

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable from battery and wait for at least three minutes before beginning work. ...

Components and Components Location
Components Location 1. AVN (A/V & Navigation head unit)2. Midrange speaker3. External amplifier4. Roof antenna (GPS + SDARS)5. Front door speaker6. Rear speaker7. Woofer speaker8. Antenna fee ...

Heater Unit. Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery/ recycling/ charging station. 3. When the e ...

Copyright © www.kiopman.com 2020