Kia Optima: Manual climate control system
1. Fan speed control knob
2. Front windshield defroster button
3. Rear window
defroster button
4. Temperature control knob
5. Air conditioning button
6.
Mode selection button
7. Air intake control button
- Heating and air conditioning
- System operation
- Climate control air filter
- Checking the amount of air conditioner refrigerant and compressor lubricant
Rear window defroster
Type A
Type B
The defroster heats the window to remove frost, fog and thin ice from the interior
and exterior of the rear window, while the engine is running.
To activate the rear window defr ...
Heating and air conditioning
1. Start the engine.
2. Set the mode to the desired position. To improve the effectiveness of heating
and cooling :
- Heating: - Cooling:
3. Set the temperature control to the desired position.
...
See also:
Underdrive Brake Control Solenoid Valve (UD/B_VFS) Specifications
Specifications
Direct control VFS [UD/B]
Control type : Normal high type
Control Pressure kpa(kgf/cm?, psi)500.14 ~ 9.81(5.1 ~ 0.1, 72.54 ~ 1.42)Current value (mA)50 ~ 850 Internal resis ...
Steering Gear box Components and Components Location
Components
1. Tie rod end2. Lock nut3. Bellows 4. Bellows band5. Tie rod6. Rack bar 7. Dust packing 8. Dust cap9. Oil seal10. Pinion plug11. Pinion assembly12. Yoke plug13. Yoke spring14. Suppor ...
Removal
1.
Remove the timing chain. (Refer
to Timing system in this group)
2.
Install a stopper pin (A) after
compressing the balance shaft chain tensioner.
3.
...