Kia Optima: Lumbar support (for driver’s seat)
Press the front portion of the switch to increase support, or the rear portion of the switch to decrease support.
Seat height
To change the height of the seat, move the lever upwards or downwards.
To lower the seat cushion, push down the lever several times.
To raise the seat cushion, pull up the lever several times. ...
Automatic adjustment (if equipped)
The front seat can be adjusted by using the control knob located on the outside
of the seat cushion. Before driving, adjust the seat to the proper position so as
to easily control the steering whe ...
See also:
Tightening Torque Table Of Standard Parts
Bolt nominal diameter (mm)
Pitch (mm)
Torque Nm (kg.cm, lb.ft)
Head Mark 4
Head Mark 7
...
Inspection
Radiator Cap Testing
1.
Remove the radiator cap, wet
its seal with engine coolant, and then install it on a pressure tester.
2.
Apply a pressure of 93.16 ~ 122.58k ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the injector connector.
3.
Measure resistance between the injector terminals
1 and 2.
...
Copyright © www.kiopman.com 2019