Kia Optima: Lighting System
- Specifications
- Components and Components Location
- Head Lamps Components and Components Location
- Head Lamps Description and Operation
- Head Lamps Repair procedures
- Room Lamp Repair procedures
- Overhead Console Lamp Schematic Diagrams
- Overhead Console Lamp Repair procedures
- License Lamp Repair procedures
- Hazard Lamp Switch Repair procedures
- Rheostat Repair procedures
- Front Fog Lamps Repair procedures
- High Mounted stop lamp Repair procedures
- Rear combination lamp Repair procedures
- Turn Signal Lamp Repair procedures
- Troubleshooting
Panoramaroof Motor Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the roof trim.
(Refer to the BD group - "Roof trim")
3.
Disconnect the panoramaroof motor (A) connector.
4.
Grou ...
Specifications
Specification
ItemsBulb TypeBulb Wattage (W)FrontHead lamp(STD)LowH7S55HighH7L55Head lamp(HID)LowD1S35HighH7L55Turn signal lampPY28/8W28Position lampPY28/8W or LED8 or LEDFog lampH8L or LED35 or ...
See also:
Replacement
1.
Disconnect the negative (-) battery
terminal.
2.
Recover the refrigerant with
a recovery/charging station.
3.
Disconnect the A/C pressure transduc ...
If the engine overheats
If your temperature gauge indicates overheating,
you will experience a loss of
power, or hear loud pinging or knocking,
the engine is probably too hot. If this happens,
you should:
1. Pull of ...
Seat Belt Buckle Switch (BS) Description and Operation
Description
The SRSCM shall monitor the status of the driver and front
passenger seat belt buckle. The SRSCM provides one pin each for the
driver and front passenger seat belt buckle status inp ...
Copyright © www.kiopman.com 2021