Kia Optima: Intake And Exhaust System - Engine Mechanical SystemKia Optima: Intake And Exhaust System

Oil Pressure Switch Repair procedures
Inspection 1. Check the continuity between the terminal and the body with an ohmmeter. If there is no continuity, replace the oil pressure switch. 2. Check the continuity between the terminal ...

Intake Manifold Components and Components Location
Components 1. Intake manifold assembly 2. Intake manifold gasket3. ETC (Electronic throttle body)4. Intake manifold stay ...

See also:

Tie-down hooks (for flatbed towing)
CAUTION Do not use the tie-down hooks for towing purposes. The hooks are designed ONLY for transport tie-down. If the tie-down hooks are used for towing, the tie-down hooks will be damaged ...

Telemetics Unit (TMU) Components and Components Location
Component Connector Pin Specification No.Pin NameTypeFromToDescription (Wiring Spec.)1GNDDC GroundTMUBatteryConnected to battery ground2GNDDC GroundTMUBatteryConnected to battery ground3-----4-- ...

Engine Coolant Temperature Sensor (ECTS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the ECTS connector. 3. Remove the ECTS. 4. After immersing the thermistor of the sensor into engine coolant, measure resistanc ...

Copyright © www.kiopman.com 2021