Kia Optima: Heated Oxygen Sensor (HO2S) Schematic Diagrams - Engine Control System - Engine Control/Fuel SystemKia Optima: Heated Oxygen Sensor (HO2S) Schematic Diagrams

Circuit Diagram


Heated Oxygen Sensor (HO2S) Specifications
Specification HO2S [Bank 1/Sensor 1] (Linear type) ItemSpecificationHeater Resistance (?)2.5 ~ 4.0 [20°C(68°F)] HO2S [Bank 1/Sensor 2] (Binary type) A/F Ratio (?)Output Voltage(V)RICHApp ...

Heated Oxygen Sensor (HO2S) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 4 and 5 [B1/S1]. Measure resistance between the HO2S termina ...

See also:

Good driving practices
Never move the shift lever from P (Park) or N (Neutral) to any other position with the accelerator pedal depressed. Never move the shift lever into P (Park) when the vehicle is in motion. Be ...

Installation
1. Reassemble the steering wheel remote control switch after connecting the connector. 2. Reassemble the steering wheel. 3. Reassemble the driver airbag ...

Removal
1. Remove the radiator grill upper cover.(Refer to the BD group - "Front bumper") 2. Remove the mounting nut and disconnect the horn connector (B), then ...

Copyright www.kiopman.com 2021