Replacement |
1. |
Remove the fuel pump (Refer to “Fuel Pump” in this group). |
2. |
Disconnect the electric pump wiring connector (A) and the fuel sender connector (B). |
3. |
Remove the cushion pipe fixing clip (C), and then separate the head assembly (D). |
4. |
Remove the return nozzle (B) after releasing the fixing hook (A). |
5. |
Remove the reservoir-cup (B) after releasing the fixing hooks (A). |
6. |
Remove the pre-filter (C) after releasing the fixing hooks (A,B).
|
7. |
Separate the electric pump motor (A) from the fuel filter (B). |
8. |
Replace new fuel filter. |
Fuel Tank Pressure Sensor (FTPS) Specifications
Specification
Pressure [kPa (kgf/cm?, in H2O)Output Voltage (V)-6.67 (-0.068, -26.8)0.502.5+6.67 (0.068, 26.8)4.5
...
Jump Starting
Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm
to yourself or damage to your vehicle or battery, follow the jump starting procedures
on this page. If in doubt, we str ...
Adjusting the height of front seat cushion
To change the height (front portion) of the seat cushion, rotate the knob located
on the outside of the seat cushion.
To lower the seat cushion, rotate the knob toward the front of the vehicle ...