Kia Optima: Front Impact Sensor (FIS) Description and Operation - SRSCM - RestraintKia Optima: Front Impact Sensor (FIS) Description and Operation

Description
The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collision. The Front Impact Sensor (FIS) sends acceleration data to the SRSCM.
SRS Control Module (SRSCM) Repair procedures
Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. Remove the floor console. (Refer ...

Front Impact Sensor (FIS) Components and Components Location
Components ...

See also:

Disassembly
1. Remove the alternator cover (A) using a screw driver after loosening the nuts (B). 2. Remove the slip ring guide (A) and then loosen the ...

Canister Close Valve (CCV). Specifications
Specification Item Specification Coil Resistance (Ω) 19.8 ~ 21.8 [20°C(68°F)] ...

Components and Components Location
Components 1. BSD unit (RH : Master/ LH : Slave)2. BSD switch3. BSD warning lamp (Built in the outside mirror) ...

Copyright © www.kiopman.com 2020