Kia Optima: Exhaust Manifold Components and Components Location
| Components |
| 1. Heat protector 2. Exhaust manifold | 3. Exhaust manifold gasket 4. Exhaust manifold stay |
Intake Manifold Repair procedures
Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal.
Tightening torque:
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft)
3.
Remove the air c ...
Exhaust Manifold Repair procedures
Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal.
Tightening torque:
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft)
3.
Disconnect the o ...
See also:
Components and Components Location
Component Location
1. Slide motor
2. Front height motor
3. Rear height motor
4. Lumber support motor
5. Power seat control switch
6. Recline motor
7. Reclin ...
Temperature Control Actuator Description and Operation
Description
1.
Heater unit includes mode control actuator and temperature control actuator.
2.
Temperature control actuator is located at the heater unit.
It regulates the temperature by the ...
Troubleshooting
Troubleshooting
SymptomPossible causeRemedyTachometer does not operateCluster fuse (10A) blownCheck for short and replace fuseCAN line faultyCheck the EMSTachometer faultyCheck tachometerWiring o ...
Copyright © www.kiopman.com 2021