Blind Spot Detection Indicator Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the mirror (C) from the mirror holder after disconnecting the heater connector (A) and BSD warning connector (B).
3.
Remo ...
Additional Programming for Rolling Code Devices
For any rolling-code-equipped device; follow the steps below after completing
the "Programming" section. A second person may make the following steps easier.
1. Locate the "learn&quo ...
Overloading
WARNING - Weight Rating
The gross axle weight rating (GAWR) and the gross vehicle weight rating (GVWR)
for your vehicle are on the manufacturer’s label attached to the driver’s door.
Exceedi ...