Kia Optima: Engine Clutch Control Solenoid Valve (E/C_VFS) Description and Operation - Automatic Transaxle Control System - Automatic Transaxle SystemKia Optima: Engine Clutch Control Solenoid Valve (E/C_VFS) Description and Operation

Description
Engine clutch control solenoid valve (E/C_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure to the engine clutch.


Output Speed Sensor Repair procedures
Inspection 1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. Removal     • ...

Engine Clutch Control Solenoid Valve (E/C_VFS) Specifications
Specifications Direct control VFS [E/C] Control type : Normal low type Control Pressure kpa(kgf/cm?, psi)9.81 ~ 500.14(0.1 ~ 5.1, 1.42 ~ 72.54)Current value (mA)50~850 Internal resistanc ...

See also:

Repair procedures
Refrigerant System Service Basics • Since the electric compressor uses high-voltage, you should use PVE or POE oil which have high Volumetric Resistivity. • Do not use the same ...

Manifold Absolute Pressure Sensor (MAPS) Specifications
Specification Pressure (kPa)Output Voltage (V)20.00.79 46.71.84101.34.0 ...

SS-B Solenoid Valve(ON/OFF). Description and Operation
Description SS-B solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-B Solenoid valve(ON/OFF) is installed at valve body. ...

Copyright www.kiopman.com 2020