Kia Optima: Description and Operation
| Description |
The hydraulic system consists of oil, an oil filter, oil
pump, and a valve body (valves and solenoid valves). The machanical oil
pump is in the transaxle and is mechanically turned by the input shaft
of the transaxle. The electric oil pump is turned by an electrical motor
and is mounted on the outside of the transaxle housing. ATF passes
through the oil filter and gets distributed along the oil channels.
Hydraulic System
...
Components and Components Location
Component Location
1. Automatic transaxle assembly 2. Machanical oil Pump assembly (MOP)3. Valve body assembly4. ATF Warmer5. Electric oil pump (EOP)
...
See also:
Description and Operation
Description
Automatic transaxle system relies on various measurement data
to determine the current control status and extrapolate the necessary
compensation values. These values are used to con ...
Component Location Index
Engine Room
1. Receiver Drier
2. Condenser
3. Service Port (High)
4. Service Port (Low)
5. A/C Pressure Transducer
6. Compressor
7. Expansion Val ...
Electric A/C compressor Specifications
Specification
ModelESC33i MotroBLDC MotorControl TypeCANCompression TypeScrollCapacity33cc/revOperating Voltage Range190~320VRated Voltage288VMount TypeEngine Mounting, 6 Point Mounting
...
Copyright © www.kiopman.com 2021