Kia Optima: Description and Operation
| Description |
Emissions Control System consists of three major systems.
| • |
The Crankcase Emission Control System prevents blow-by gas
from releasing into the atmosphere. This system recycles gas back into
the intake manifold (Closed Crankcase Ventilation Type). |
| • |
The Evaporative Emission Control System prevents evaporative
gas from releasing into the atmosphere. This system burns gas at
appropriate engine operating condition after gathering it in the
canister. |
| • |
The Exhaust Emission Control System converts the three
pollutants [hydrocarbons (HC), carbon monoxide (CO), and oxides of
nitrogen (NOx)] into harmless substances by using the 3-way catalytic
converter.
|
Components and Components Location
Components Location
1. PCV valve2. Canister3. Purge control solenoid valve (PCSV)4. Fuel tank pressure sensor (FTPS)5. NVLD (Natural Vaccum Leakage Detection) Module6. Fuel level sender (FLS)7 ...
Schematic Diagrams
Schematic Diagram
...
See also:
Side impact air bag
Your vehicle is equipped with a side impact air bag in each front seat. The purpose
of the air bag is to provide the vehicle's driver and/or the front passenger with
additional protection ...
Panoramaroof Motor Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the roof trim.
(Refer to the BD group - "Roof trim")
3.
Disconnect the panoramaroof motor (A) connector.
4.
Grou ...
Front Bumper Components and Components Location
Components(1)
1. Front bumper cover2. Front bumper upper strip assembly3. Radiator grill upper cover4. Front bumper lower stiffner5. Front bumper rail assembly6. Front bumper side bracket [LH]7 ...
Copyright © www.kiopman.com 2020