Kia Optima: Description and Operation - Ignition System - Engine Electrical SystemKia Optima: Description and Operation

Description
Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are preprogrammed in the memory of the ECM (Engine Control Module).
The engine operating conditions (speed, load, warm-up condition, etc.) are detected by the various sensors. Based on these sensor signals and the ignition timing data, signals to interrupt the primary current are sent to the ECM. The ignition coil is activated, and timing is controlled.
Ignition System
...

Repair procedures
On-vehicle Inspection Spark Test 1. Disconnect the ignition coil connectors (A).     When disconnecting the ignition coil connector, pull out the locking pin (A) and ...

See also:

26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation
Description 26 brake control solenoid valve(26/B_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure to the 26 brake. ...

How vehicle audio works
AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna on your vehicle. This signal is then received by the radio and s ...

Heater & A/C Control Unit(Manual). Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Using the screwdriver, remove the side cover (A). 3. Loosen the mounting scre ...

Copyright © www.kiopman.com 2020