Component Location |
1. Rear defogger relay 2. EWP relay 3. Deicer relay 4. ACC realy 5. IG1 relay | 6. IG2 relay 7. Wiper relay 8. Rain sensor relay 9. Burglar alarm horn relay | 10. Blower relay 11. Fuel pump relay 12. Horn relay 13. Egnine control relay |
Blind Spot Detection Indicator Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the mirror (C) from the mirror holder after disconnecting the heater connector (A) and BSD warning connector (B).
3.
Remo ...
CVVT Oil Control Valve (OCV) Specifications
Specification
ItemSpecificationCoil Resistance (?)6.9 ~ 7.9 [20°C(68°F)]
...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the RCV control solenoid valve connector.
3.
Measure resistance between the valve terminals 1
...