1. VOLUME button : Raises or lowers speaker volume.
2.
button : Activates voice recognition.
3. button : Places and transfers calls.
4. button : Ends calls or cancels functions.
Installation
1.
Remove ignition key from the
vehicle.
2.
Disconnect the negative (-) cable
from battery and wait for at least three minutes.
3.
Install the ancho ...
Inspection
Rain Sensing Wiper
1.
In IGN2 ON state, if auto switch
input (LIN communication) is ON then both wiper low relay and wiper high
relay outputs are controlled by the rain sensor input s ...
Checking the Engine Oil Level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait a few minutes for the oil to return to the oil pan. ...