Kia Optima: Blower
- Blower Unit Components and Components Location
- Blower Unit Repair procedures
- Blower Motor Repair procedures
- PWM Blower Module Repair procedures
- Climate Control Air Filter Description and Operation
- Climate Control Air Filter Repair procedures
- Intake Actuator Components and Components Location
- Intake Actuator Description and Operation
- Intake Actuator Repair procedures
Heater hose pump Repair procedures
Inspection
1.
Connect the battery voltage and check the heater hose pump motor rotation.
1. +2. -
2.
If the heater hose pump voltage is not operated well,
substitute with a known-good h ...
Blower Unit Components and Components Location
Component Location
Components
1. Duct Seal2. Duct Case3. Inlet Door4. Intake Actuator5. Inlet Duct Case (A)6. Climate Control Air Filter7. Climate Control Air Filter Cover8. Blower Upper Case9. ...
See also:
Specifications
Specifications
Purge Control Solenoid Valve (PCSV)
? Specification
ItemSpecificationCoil Resistance (?)19.0 ~ 22.0 [20°C(68°F)]
Fuel Tank Pressure Sensor (FTPS)
? Type: Piezo-Resistive ...
Escort welcome (if equipped)
When the headlight(light switch in the headlight or AUTO position) is on and
all doors (and trunk) are locked and closed, the position light and headlight will
come on for 15 seconds if any of the ...
Automatic Transaxle Repair procedures
Removal
•
Be sure to read and follow the “General Safety Information
and Caution” before doing any work related with the high voltage
system. Failure ...
Copyright www.kiopman.com 2020