Kia Optima: Air Conditioning System
- General Safety Information and Caution
- Description and Operation
- Repair procedures
- Components and Components Location
- Compressor Oil Repair procedures
- Refrigerant line Components and Components Location
- Refrigerant line Repair procedures
- Electric A/C compressor Troubleshooting
- Electric A/C compressor Specifications
- Electric A/C compressor Components and Components Location
- Electric A/C compressor Description and Operation
- Electric A/C compressor Repair procedures
- Condenser Components and Components Location
- Condenser Repair procedures
- Receiver-Drier Repair procedures
- Evaporator Temperature Sensor Description and Operation
- Evaporator Temperature Sensor Repair procedures
- A/C Pressure Transducer Components and Components Location
- A/C Pressure Transducer Description and Operation
- A/C Pressure Transducer Repair procedures
- Photo Sensor Description and Operation
- Photo Sensor Repair procedures
- Ambient Sensor Description and Operation
- Ambient Sensor Repair procedures
- Cluster ionizer Components and Components Location
- Cluster ionizer Description and Operation
- Cluster ionizer Repair procedures
Troubleshooting
Troubleshooting
Problem Symptoms Table
Before replacing or repairing air conditioning components,
first determine if the malfunction is due to the refrigerant charge, air
flow or compressor. ...
General Safety Information and Caution
Instructions
When Handling Refrigerant
1.
R-134a liquid refrigerant is highly volatile. A drop on the
skin of your hand could result in localized frostbite. When handling the
refrigerant, be ...
See also:
Underdrive Brake Control Solenoid Valve(UD/B_VFS). Specifications
Specifications
Direct control VFS[35R/C]▷ Control type : Normal low type
Control Pressure kpa(kgf/cm², psi)
500.14~9.81(5.1~0.1,72.54~1.42)
Curren ...
Seat belt warning (for driver’s seat)
The driver's seat belt warning light and chime will activate to the following
table when the ignition switch is in "ON" position.
*1 Warning pattern repeats 11 times with an inter ...
Installation
1.
Remove the ignition key from
the vehicle.
2.
Disconnect the battery negative
cable and wait for at least three minutes before beginning work.
3.
In ...
Copyright © www.kiopman.com 2021