Kia Optima: Accelerator Position Sensor (APS) Description and Operation - Engine Control System - Engine Control/Fuel SystemKia Optima: Accelerator Position Sensor (APS) Description and Operation

Description
Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine control system, so it consists of the two sensors which adapt individual sensor power and ground line. The second sensor monitors the first sensor and its output voltage is half of the first one. If the ratio of the sensor 1 and 2 is out of the range (approximately 1/2), the diagnostic system judges that it is abnormal.


Heated Oxygen Sensor (HO2S) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 4 and 5 [B1/S1]. Measure resistance between the HO2S termina ...

Accelerator Position Sensor (APS) Specifications
Specification AcceleratorPositionOutput Voltage (V)APS1APS2C.T0.7 ~ 0.80.29 ~ 0.46W.O.T3.85 ~ 4.351.93 ~ 2.18 ...

See also:

Windshield Wiper Blade Maintenance
Contamination of either the windshield and wiper blades with foreign matter such as insects, tree sap, and hot wax treatments used by some commercial car washes can reduce wiper effectiveness. If ...

NVLD(Natural Vacuum Leakage Detection) Schematic Diagrams
Circuit Diagram ...

To Resume the Preset Speed
The vehicle will automatically resume the speed set prior to cancellation when you press and release the RES/ACCEL switch, providing the vehicle speed is above 25 mph (40 km/h). ...

Copyright © www.kiopman.com 2020