Kia Optima: 35R Clutch Control Solenoid Valve (35R/C_VFS) Description and Operation - Automatic Transaxle Control System - Automatic Transaxle SystemKia Optima: 35R Clutch Control Solenoid Valve (35R/C_VFS) Description and Operation

Description
35R clutch control solenoid valve(35R/C_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure to the 35R clutch.


Line Pressure Control Solenoid Vale Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct (A). Tightening torque: 7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft) 3. Remove the air cleaner assembly. (1) D ...

35R Clutch Control Solenoid Valve (35R/C_VFS) Specifications
Specifications Direct control VFS[35R/C] Control type : Normal high type Control Pressure kpa(kgf/cm?, psi)500.14 ~ 9.81(5.1 ~ 0.1, 72.54 ~ 1.42)Current value (mA)50 ~ 850 Internal resis ...

See also:

Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the driver airbag module. (Refer to the RT group) 3. Remove the steering wheel. (Refe ...

Repair procedures
Refrigerant System Service Basics • Since the electric compressor uses high-voltage, you should use PVE or POE oil which have high Volumetric Resistivity. • Do not use the same ...

When Your Vehicle Is Being Towed By Another Vehicle Other Than a Tow Truck (in case of an emergency)
Turn the ignition switch to ACC so the steering wheel isnt locked. Place the transaxle shift lever in N (Neutral). Vehicles equipped with automatic transaxles should not exceed 28 mph and s ...

Copyright www.kiopman.com 2020