Kia Optima: 26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation

Engine Clutch Control Solenoid Valve (E/C_VFS) Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Remove the air duct (A). Tightening torque: 7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft) 3. Remove the air cleaner assembly. (1) D ...

26 Brake Control Solenoid Valve(26/B_VFS) Specifications

Specifications Direct control VFS[26/B] Control type : Normal low type Control Pressure kpa(kgf/cm?, psi)9.81 ~ 500.14(0.1 ~ 5.1, 1.42 ~ 72.54)Current value (mA)50 ~ 850 Internal resista ...

See also:

Windshield Deicer. Repair procedures
Inspection 1. Remove the cowl top cover. (Refer to the wiper) 2. Disconnect the windshield deicer connector (A) from the wiper motor linkage. 3. ...

Alignment Repair procedures
Front wheel alignment     When using a commercially available computerized wheel alignment equipment to inspect the front wheel alignment, always position the vehicle o ...

Installation
1. Installation is reverse of removal. Accelerator pedal module installation nut: 9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) Accelerator pedal module ...